Glass Laboratory Media Bottles

Pyrex® Glass Media Bottles: GL45 thread size fits all of the 45mm bottle top vacuum filters that we carry. Chemically resistant and graduated for easy dispensing and storage! Furnished with one-piece, orange polypropylene, plug seal, and linerless cap. Clear polypropylene, drip-free pouring rings. Autoclavable to 121C. Pyrex Glass Media Bottle with Cap 100 ml graduated bottle with 45mm neck Each: $8.50 Case of 10: $75.00 250 ml graduated bottle with 45mm neck Each: $9.50 Case of 10: $85.00 500 ml graduated bottle with 45mm neck Each: $11.25 Case of 10: $125.00 1000 ml graduated bottle with 45mm neck Each: $13.75 Case of 10: $145.00 2000 ml graduated bottle with 45mm neck Each: $35.50 Case of 10: $330.00 5000 ml graduated bottle with 45mm neck Each: $107.00 10,000 ml graduated bottle with 45mm neck Each: $170.00	Wheaton® Standard Glass Media Bottles Borosilicate glass bottles have approximate graduations, marking rectangle, and phenolic screw cap. Bottles, caps, and liners are autoclavable. Cap screw sizes: 33-430 for 125 through 500 mL bottles and 38-430 for 1000 mL bottles. All of our 33mm bottle-top filters fit perfectly on the 125ml 500ml bottles with the 33-430 necks. Wheaton Standard Glass Media Bottle with Cap 125 ml graduated bottle with 33mm neck Each: $5.50 Case of 48: $195.00 250 ml graduated bottle with 33mm neck Each: $7.00 Case of 48: $250.00 500 ml graduated bottle with 33mm neck Each: $10.50 Case of 24: $193.50 1000 ml graduated bottle with 38mm neck Each: $13.75 Case of 24: $240.50
Stericup Receiver Flask; Radio-sterilized For storage of sterilized or clarified fluids. Fits 45mm bottle top vacuum filters. Made of Polystyrene plastic with a maximun operating temperature of 45C. Stericup Receiver Flask; Radio-sterilized 250ml Each: $4.50 Stericup Receiver Flask; Radio-sterilized 500ml Each: $6.00 Stericup Receiver Flask; Radio-sterilized 1000ml Each: $8.00	33mm Caps with Attached Silicone Septas Black 33mm phenolic caps with attached 33mm silicone septa. Used to seal a Wheaton standard media bottle and allow drawing of the contained fluid with a syringe. 33mm black phenolic cap with attached 33mm silicone septa Each: $2.75
Fisher Scientific ® • Durable piston, reinforced glass barrel provides highest degree of chemical resistance and eliminates problems of abrasion and swelling. • Precise "click-stop" volume setting mechanism yields highly reproducible dispensed volumes, dispenser head rotates full 360 degrees. • Complete assembled unit is fully autoclavable at 121°C. Each unit includes an individual calibration certificate. All units have 45mm thread and include 32 and 38mm adapters. These dispensers fit our 45mm thread media bottles perfectly. Ceramus dispenser with adjustable volume from 5 ml – 30ml (1.0ml increments) Each: $470.00	Dispensette® III Improved features for safety and convenience! Analog adjustable volume models with volume ranges from 2.5 to 50 mL Digital models offer “Easy Calibration™” in seconds, without tools, or ISO 9000/GLP compliance Safety discharge system reduces risk of accidental dispensing SafetyPrime™ valve system minimizes reagent waste during priming Floating piston design means no seals to wear out or replace Accuracy of 0.5% and reproducibility of 0.1% Valve block can be rotated 360° Autoclavable at 121°C Easy disassembly for quick cleaning and maintenance All units have standard 45 mm thread plus additional adapters for 33mm and 38 mm neck bottles All units include discharge tube, telescopic filling tube, mounting tool, certificate of performance (with serial number) and operating manual Dispensette III dispenser with adjustable volume from 2.5 ml – 25ml Each: $540.00 Dispensette III dispenser with adjustable volume from 5 ml – 50ml Each: $560.00
45mm Open Top Caps and Silicone Septa PBT high temperature red 45mm open top cap. To be used with 45mm silicone septa to seal a Pyrex media bottle or a Corning Easy Grip sterile media bottle and allow drawing of the contained fluid with a syringe. 45mm open top high temperature cap Each: $7.85 45mm open top high temperature cap Pack of 10: $71.85 45mm silicone septa for use with 45mm open top cap Each: $6.50 45mm silicone septa for use with 45mm open top cap Pack of 10: $53.65
Solid Marker is solidified paint in a marker. While both safe and non-toxic, the Solid Marker will write on virtually everything from any type of glassware- including: beakers, flasks, glass tubing, vials, pipets, funnels, media bottles, cylinders, petri-dishes, wood, cloth & canvas, plastic, metals, rubber, cardboard, fiberglass, and concrete. Will mark through oil, grease, rust, mud, and snow – inside or outside. Dries quickly for a permenent, waterproof and fade resistant finish. Features: - Twist-action paint advance and secure capping - No mess or drip application - 13mm wide mark, can be trimmed with a knife for smaller marks - Performs in a broad range of temperatures from 14 – 392 Fahrenheit - Alcohol based cleaners will remove paint from non-porous surfaces - Availible in a variety of colors White Price: $3.45 Yellow Price: $3.45 Red Price: $3.45 Orange Price: $3.45 Black Price: $3.45	MicroPerm is an ultra fine line, waterproof permanent ink pen. The alcohol solvent, dye-stuff colorant ink will write on nearly any non-porous surfaces including: glass, metal, plastic, wood, and cellophane. This an ideal pen for incredible detail, precision, and permanence. Black ink pens availible in three point sizes. Application: - Test tubes, beakers, flasks, media bottles, vials, and most glass surfaces - Photographic and x-ray film - Crafts projects, CDs, and discs - Engineering templates and rulers - Back of photographs - Diamonds - Glossy and coated surfaces Features: - Protected tips will not split - Chemically stable - Waterproof - Permanent on most surfaces - Low odor - Meets ACMI non-toxicity standards - Alcohol based cleaners will remove ink from non-porous surfaces. Microperm Point 01 – 0.25mm Pen Price: $2.15 Microperm Point 03 – 0.35mm Pen Price: $2.15 Microperm Point 05 – 0.45mm Pen Price: $2.15 Microperm Three-pack combo set (Includes 1 pen of each: 0.25mm, 0.35mm, and 0.45mm.) Price: $6.33
Pigma Ink continues to be the most reliable permanent ink on the market today. Pigma Micron pens provide a perfect companion product to your irreplaceable, laboratory and/or archival quality notebooks. Experience smooth, skip-free writing, and with a crisp ink that leaves consistent lettering and lines every time. Currently available three nib sizes for precise line widths: 01-0.25mm, 03-0.35mm, and 05-0.45mm. Technical Qualities and Features: - Waterproof, chemical resistant - Fade resistant, lightfast - Will not smear or feather when dry - Does not bleed thru most papers - Steel sleeve protects tip - Nibs will not damage paper - Meets ASTM & ACMI non-toxicity standard Applications: - Lab notebook and log book documentation - Labeling scientific specimens - Support for patent activities, auditors, legal entities & courts - Used by curators, archisists, artists, calligraphers, & personal historians Point 01 Pen Price: $2.20 Point 03 Pen Price: $2.20 Point 05 Pen Price: $2.20